Barry D.E.W. Line® Dielectric Work Rope

Insulating work rope tool offering and excellent dielectric properties and which can be knotted. This line tool is designed for performing live work on AC or DC energized apparatus.

Meets or exceeds the dry or wet electrical requirements of:

• IEC 62192:2009

Arc-Flash rated

• Resistant to 40 cal/cm² (category 4)

Features

• Unique insulating properties
• Knottable
• Cleanable and easy to maintain and test
• Exceptionally low leakage current, whether dry or wet
• Protection from high fault current
• High strength
• Low elongation
• Lightweight and low volume
• Fully sealed and hydrophobic
• Smooth surface
• High abrasion resistance
• Easy to deploy
• Excellent resistance to UV
• Sealed termination at each end
• Easy storage in optional transport bag with desiccant

SPECIFICATIONS:

Product Code	Diameter	Break Strength*	WLL @ 5:1**	WLL @ 10:1**	Colour	Standard Lengths
HL-NP2800	13 mm (1/2”)	2 857 kg (6 300 lb)	571 kg (1 260 lb)	285 kg (630 lb)	Orange	15 m (50') 30 m (100') 45 m (150')
HL-NP4500	14 mm (9/16”)	4 535 kg (10 000 lb)	907 kg (2 000 lb)	453 kg (1 000 lb)

Note: Available in other lengths, diameters and break strengths.
*   Reduce break strength by 50% when using knots
** Use an appropriate safety factor (SF) to determine correct working load limit (WLL) for intended use