Insulating rope tool which may serve as a replacement for FRP strain link sticks during temporary installations in energized fields and high voltage systems (AC or DC).
Highlights
- Unique insulating properties
- Cleanable and easy to maintain and test
- Exceptionally low leakage current, whether dry or wet
- Protection from high fault current
- High strength
- Low elongation
Technical Data Sheet
# HL-NK38000
Insulating rope tool which may serve as a replacement for FRP strain link sticks during temporary installations in energized fields and high voltage systems (AC or DC).
Highlights
- Unique insulating properties
- Cleanable and easy to maintain and test
- Exceptionally low leakage current, whether dry or wet
- Protection from high fault current
- High strength
- Low elongation
Product Code: HL-NK38000
Product link: https://www.barry.ca/rope-systems/dielectric-rope-and-net/hl-nk38000
Request for information:
Barry D.E.W. Line® Dielectric HD Rope Link
Specifications
Insulating rope tool which may serve as a replacement for FRP strain link sticks during temporary installations in energized fields and high voltage systems (AC or DC).
Meets or exceeds the dry or wet electrical requirements of :
- IEC 62192:2009
- ASTM F1701-12
Arc-Flash rated
- Resistant to 40 cal/cm2 (category 4)
Features
- Unique insulating properties
- Cleanable and easy to maintain and test
- Exceptionally low leakage current, whether dry or wet
- Protection from high fault current
- High strength
- Low elongation
- Lightweight and low volume
- Fully sealed and hydrophobic
- Smooth surface
- High abrasion resistance
- Easy to deploy
- Excellent resistance to UV
- Sealed termination at each end, with choice of closed or open spelter sockets
- Comes with transport bag
Specifications
- Working Load Limit: 15 000 lb (6 804 kg)
- Diameter: 1-1/4” (32 mm)
- Terminations: Closed or open spelter sockets
- Colour: Black
- Weight: 35 lb (15.9 kg) for 15’ length w/ closed spelters 50 lb (22.7 kg) for 15’ length w/ open spelters
- Standard Lengths: 10’ (3.0 m), 15’ (4.6 m), 20’ (6.1 m) (Other lengths available upon request)
# HL-NK38000C: Closed spelter socket both ends
# HL-NK38000O: Open spelter socket both ends
# HL-NK38000X: Closed spelter socket/open spelter socket
We also recommend:
Barry D.E.W. Line® Dielectric Rope Link
Product Code: HL-NK19000
Barry D.E.W. Line® Dielectric Tag Line
Product Code: HL-NK1000
Barry D.E.W. Line® Dielectric Work Rope
Product Code: HL-NP
Barry D.E.W. Line® Dielectric Rescue Rope
Product Code: HL-NF3400
Lifting Beam for Regulators
Product Code: 1091551-1
Rope Systems and Utilities Rigging Equipment Technical Publications
Barry Publications
- 5 Golden Rules for Rope and Netting Systems Design
- Technical Properties of Synthetic Fibres
- The Cordage Institute's International Guideline on the Safer Use of Fiber Rope (CI 1401)
Articles on Barry Cordage Blog
- What is a dielectric rope ?
- Developing the Best Dielectric Rope
- Dielectric Safety Net: A Proven Solution for High-Voltage Work
Barry Handout
Product Training:
Barry D.E.W. Line® Insulating Rope Inspection & Maintenance
Patent
Barry D.E.W. Line® Products are Patent Pending.
Trademark
Barry D.E.W. Line® and all Barry D.E.W Line® products are trademarks of Barry Cordage Ltd. Use of these trademarks is strictly prohibited unless authorized by Barry.
SafeLine® is a trademark of BlueWater Ropes.
Dyneema® is a trademark of DSM. Use of this trademark is prohibited unless strictly authorized.
Technora® is a registered trademark of Teijin Ltd.
Spectra® is a trademark of Honeywell International Inc.
Stable Braid, Static Rope et Tech-12 are products of Samson Rope Technologies.
Vectran® is a trademark of Kuraray Co. Ltd.