Need help choosing the right product for your application?
Our experts are here to help - contact us today.
Debris Netting and Safety Fences for Mines, Buildings, Civil Infrastructure and Industrial Sites
Barry debris netting and safety fences do two jobs: they contain falling debris, and they close off areas where people must not enter. They protect workers and the public in underground and surface mines, on buildings and facades, on civil infrastructure such as bridges, and around industrial work zones.
Mining Safety Fence for Underground and Surface Mines
The Barry mining safety fence (BTMFF09) is a fluorescent orange barricade used to close off blasting zones and other high-risk areas. It was developed more than 20 years ago with underground mining specialists and is now used on mine sites worldwide.
- Visible after blasting: a polyester fibre core with a PVC coating, designed to stay in place and remain visible after a blast. Blasting damages the fence, and the number of blasts it remains functional for varies.
- High visibility: fluorescent orange, easy to see in low-light headings during post-blast inspection.
- Cold resistant: withstands extreme cold down to -40°C (-40°F).
- Supplied in rolls: 50 in x 300 ft (1.27 m x 92 m), lightweight and easy to carry, store and cut underground.
- Simple to install: hung on steel cable, rope or elastic rope through its reinforced borders.
The same fence is used as a temporary work zone barrier, as a safety perimeter on the surface, and as protection against falling objects on scaffolding and platforms.
Debris Netting for Bridges, Facades and Construction Sites
Debris netting contains loose material before it reaches workers, pedestrians, vehicles or equipment below. Typical uses include bridge and infrastructure work, building and brick facades, pedestrian walkways, conveyors, warehouses and manufacturing plants.
Fine mesh panels hold back small fragments and dust, while knotless netting takes heavier loads. The two are often installed together: a light, fine mesh to stop small pieces, backed by a stronger net to carry the load.
Choose the Right Net or Fence for Your Application
- Blasting zones and mine barricades: Safety Fences for Mining Sites (BTMFF09), in 300 ft rolls.
- Fine debris and dust on facades and structures: Barrytex polyester safety mesh panel (3/8 in) or Barrytex PVC safety mesh panel.
- Heavier debris and containment: knotless nylon netting 700 lb, 2.5 in mesh.
- Small objects and light containment: knotless nylon netting 100 lb, 0.5 in mesh or knotless polyester netting 100 lb, 1 in mesh.
Net panels are made to your dimensions. Contact Barry with the size of the area, the type of debris and the way the net will be attached.
Tested and Supported by Barry
Barry designs, tests and validates its safety nets in three in-house laboratories for dynamic, static and electrical testing. In impact tests carried out with the UNB Ballistics and Mechanical Test Lab, Barry nets restrained brick projectiles at speeds up to 41.7 m/s. Every net has a technical data sheet that gives the breaking strength of its mesh. Barry does not install or certify net systems, but its team supports design engineers and installers with guidance and testing.
Frequently Asked Questions
Answers to the questions we hear most often about debris netting and the Barry mining safety fence.
What is debris netting?
Debris netting is a net or fine mesh installed under, around or against a structure to contain falling material such as fragments, tools, rocks or bricks before it reaches people or equipment below. It is used on bridges, building facades, construction sites, industrial plants and in mines.
What is a mining safety fence?
A mining safety fence is a lightweight, highly visible barricade used to close off blasting zones and other high-risk areas in underground and surface mines. The Barry mining safety fence (BTMFF09) is fluorescent orange, made of a polyester fibre core with a PVC coating, and supplied in rolls of 50 in x 300 ft (1.27 m x 92 m).
Does the mining safety fence remain visible after blasting?
Yes. Its fluorescent orange colour and its presence remain visible after one blast or several. Blasting does damage the fence, starting with the first blast, and the number of blasts it remains functional for varies with blast intensity, charge weight and the installation method.
How is the mining safety fence installed underground?
It is hung on steel cable, rope or elastic rope, at the top only or at the top and bottom depending on blast intensity and site requirements. Its reinforced borders allow the cable to be threaded without damaging the mesh, and it can be cut to width with standard underground tools.
Does the mining safety fence resist extreme cold?
Yes. The polyester fibre core and PVC coating withstand extreme cold down to -40°C (-40°F), and the fence resists UV and weathering for use underground and outdoors.
Which debris netting should I use for bridge or facade work?
Use a fine mesh panel, such as Barrytex polyester or PVC mesh, to hold back small fragments and dust, and a knotless net when heavier debris must be contained. The two are often installed together. The right choice depends on the size and weight of the debris, the fall distance and how the net is attached.
Can debris netting stop a falling brick?
Correctly designed nets can restrain projectiles. In tests with the UNB Ballistics and Mechanical Test Lab, Barry nets restrained brick projectiles at speeds up to 41.7 m/s without pass-through. Light-duty netting used together with a heavy-duty net was effective at stopping both pass-through and rebound. Results depend on the net, its geometry and the impact conditions, so each application should be validated.
Is the mesh breaking strength the same as the capacity of the net?
No. The breaking strength shown on the technical data sheet is that of a single mesh. The capacity of the whole net system also depends on the installation angle, net geometry, tension, number of attachment points, climate, and the type and speed of the mass to be stopped.
Can Barry debris netting be made to custom sizes?
Yes. Net panels are made to your dimensions, with a webbing border for attachment. The mining safety fence is supplied in standard rolls of 50 in x 300 ft and can be cut to size on site.
Does Barry install or certify safety netting systems?
No. Barry manufactures and tests the nets and supports design engineers and installers with technical guidance, laboratory testing and residual strength tests on nets in service.





