Contact Us   I   FAQ
English

3M™ DBI-SALA® Sliding Beam Anchor, small, 1 each

3M™ DBI-SALA® Sliding Beam Anchor, small, 1 each

This sliding beam anchor fits a 3.5 in to 14 in (9 cm to 35.5 cm) wide beam.

Highlights

  • Hands-free mobility and 360-degree swiveling D-ring optimizes your mobility on the beam
  • Rugged durability, corrosion-resistant construction meets ANSI standards for weather, environmental, and storage conditions
  • Dual ratcheting adjustment buttons are accessible above the beam, while locking mechanism is located on the side to reduce accidental engagement Compact size and lightweight materials make transportation a breeze
  • Meets ANSI Z359.18 Anchorage Connector standard; OSHA 420 lb/ANSI 310 lb ratings
  • Versatile size ranges to fit a variety of beams
  • 5,000 lb (22 kN) strength and up to 420 lb (189 kg) capacity

Request for information:
3M™ DBI-SALA® Sliding Beam Anchor, small, 1 each

Description

Specifications and resources:

Product name: 3M™ DBI-SALA® Sliding Beam Anchor, small, 1 each
Product code: 2104710
Product type: Permanent and Temporary Anchorage
Manufacturier: DBI Sala
Product link: https://www.barry.ca/dbi-sala-products/permanent-and-temporary-anchorage/2104710

Mobility. It's critical to getting the job done, just like your fall protection. With the new 3M™ DBI-SALA® Sliding Beam Anchor, you get the best of both worlds. Once you secure it to the beam using the redesigned adjustment buttons, simply connect your self-retracting lifeline (SRL) or lanyard to the swiveling D-ring and you're ready to work. The anchor point slides effortlessly behind you.

  • Hands-free mobility and 360-degree swiveling D-ring optimizes your mobility on the beam
  • Rugged durability, corrosion-resistant construction meets ANSI standards for weather, environmental, and storage conditions
  • Dual ratcheting adjustment buttons are accessible above the beam, while locking mechanism is located on the side to reduce accidental engagement Compact size and lightweight materials make transportation a breeze
  • Meets ANSI Z359.18 Anchorage Connector standard; OSHA 420 lb/ANSI 310 lb ratings
  • Versatile size ranges to fit a variety of beams
  • 5,000 lb (22 kN) strength and up to 420 lb (189 kg) capacity
  • For foot level tie-off, use 3M™ DBI-SALA® Nano-Lok™ Edge Twin-Leg Quick Connect Self-Retracting Lifeline - Cable, 3500225, 8 ft (2.4 m)

Suggested Applications

  • Bridge work
  • Buildings
  • Warehouses
  • Arenas
  • Parking ramps

Fall Protection Technical Publications

Trademark
3M ™, 3M ™ DBI-SALA® and 3M ™ Protecta® are trademarks of 3M.

Note: Barry sells to companies, professionals, and government only.
Note: Minimum quantities may apply to some products, $150 minimum purchase, sales by phone, fax, website and email only.
Note: This information is for reference only and is subject to change without prior notice.
Note: Any Barry document received by email, downloaded or printed is uncontrolled.